Description

With having advanced technology-based infrastructural support, we have emerged as a distinguished manufacturer of liquid soldering Fluxes for our large clientele.

These types of soldering fluxes are suitable for spray, wave and dip soldering purpose. We provide liquid soldering fluxes in different packaging options that can be obtained at the reasonable price range.

 

The table below specifies different grades of fluxes.

 

Product DesignationTechnologyColorSolid contentSpecific GravityRECOMMENDED APPLICATION
KVS- 215Rosin – BasedClear amber12-14%0.825Flux has excellent foaming properties and can be applied on printed circuit boards by foam, brushing or spraying. Applicable through hole and discrete components. Density should be maintained using ‘’510’’ solvent.
KVS-207Rosin – BasedClear amber6 – 8%0.805Flux can be applied on component or printed circuit boards by dipping, brushing or spraying. Flux density should be maintained using ‘’505’’ solvent
KVS 302 – seriesNo Clean Halide freeColorless2 – 3%0.8Surface mount devices and high density plated through hole assembly soldering for electronics mother board, telecommunication applications. Used for Both spray and foam. Flux density should be maintained using ‘’505’’ solvent.
KVS 306Resin based No cleanPale yellow4-5%0.805Wave soldering, leaves a low level of non-tacky, non-corrosive residue. Flux density should be maintained using ‘’505’’ solvent.
KVS- 800 seriesRosin – Containing No Clean Halide FreePale yellow4 – 5%0.795-0.805Wave soldering, leaves a low level of non-tacky, non-corrosive residue. Flux density should be maintained using ‘’505’’ solvent.
BGA –FluxNo cleanPale yellowSemi solidHigh viscosityApplicable for BGA ,flip chip component and SMD rework
KVS- 900VOC – FreeColorless0.0251.01- 1.05Flux can be applied on printed circuit boards by foam, brushing or spraying. Non Tacky bright solder joints.
KVS – Hot Air leveling FluxWater solubleLight pink–1.10- 1.15The flux can be applied on pre-cleaned PCBs by dip, roller-coating to brush. The flux has good thermal stability for use at solder bath temperature up to 260°C. After solder coating the flux residues are completely soluble in water; thus providing PCB,s with high ionic cleanliness
KVS – Tinning FluxWater basedColorless15–20 %1.05- 1.10The flux can be applied on pre-cleaned PCBs by dip, roller-coating to brush.
KVS – Aluminum fluxWater solubleAmber to brown–1.35Suitable for soldering of aluminum to aluminum, aluminum to copper, aluminum to brass and aluminum to plated terminals. NP-Aluminum Flux can be used with all conventional soldering techniques.